#Eye fi card best buy how to#
Please read the How to add an eye-fi card if you are unfamiliar with eye-fi centre and eye-fi card settings. Take out the eye-fi card and insert in into the camera. Wait until eye-fi center has completed this process. Now add a wireless network: choose your own wireless network from the list.Įnter the password and click “add network to card”. Remove the existing network link (click on the box and press remove) The Eye-Fi card reader is usually inserted in the tablet/computer but you may use the internal SD card reader too. Insert the Eye-Fi card into the ID station. To use your existing wireless network instead of the ID station wireless network you must follow these steps: 1. The best solution is then to let ID station use your own wireless network to transfer the images from the camera. And since wireless internet networks are usually very powerful it could suppress the ID station network and this will make the communication between ID station and camera unreliable. Use your own wireless internet If you have your own wireless network (for wireless internet for example) it could be interfering with the ID station’s wireless network. The distance is less important, but remember that walls and closed doors reduce the range of the card.ĭo not place the ID station close to other wireless network devices such as wireless CCTV cameras, wireless network routers and anti-theft gates.ĭo not format the Eye-Fi card! You may delete images from the card, but do NOT format it. Make sure the camera and the ID station are in the same area/room. Make sure the camera is not set to disable WiFi (e.g. Never switch off the camera while the transfer is in progressĭo not allow the camera to go into power save mode (e.g.
#Eye fi card best buy manual#
The eye-fi card needs power! ID station Manual Make sure the battery in the camera is fully charged. How to prevent problems with the wireless communication? A few tips that will prevent problems with the wireless camera connection: 1. The Eye-Fi card in the camera uses this wireless network to send the pictures to the ID station, being the "receiver". To be able to receive the pictures from the Eye-Fi card the ID station will "transmit" a wireless network. The receiver is usually a computer, in our case the ID station. The Eye-Fi card will transmit every picture to a "receiver".
The Eye-Fi card is an SD card with a wireless network function. Introduction This document will provide information and guidelines to solve problems that may occur when using the wireless Eye-Fi connection.
0 kommentar(er)
